N.ERA BRRRUSH
THE VIBRATION THAT MAKES A DIFFERENCE
N.era bRRRush is an idea of Roberto Devolio, MDT in Curitiba, Brasil. While bRRRush is using the revolutionary N.era tips, a unique « vibe zone » has been machined on its handle.
When letting the nail of your forefinger stroke back and forth on the surface, you create a micro-vibration which propagates up to the very end of your brush tip. The small portion of porcelain on your brush will almost “ detach ” while transforming itself into a small drop very easy to apply to your build-up. The short video clip below shows you how impressive it is.
The advantage of this technique lies in the fact that much less air is integrated in the porcelain during build-up, synonimous with less porosities in the porcelain after firing - spectacular especially in the incisal area.
N.era bRRRushes are available as a set of four siizes, n° 8, 6, 4 and 1 and can of course be ordered also as single instruments. The replacement tips are the same as N.era tips. It is also possible to order the handle of bRRRush alone, in case you wish to mount a traditional Kolinsky hair brush tip for example.
H2O
HYGIENE, LOGIC, ERGONOMIC
H2O is the essential accessory which completes your porcelain working station, at the right or at the left of your mixing tray. This universal station allows you to rinse your brush in fresh water, to smoothen it in order to give it the sharpest possible tip on a viscose sponge and finally to store it, vertically dipped in water in an independant container.
All H2O components are independent, which means that you can change the water of the main container without having to touch the storage container… or vice versa. Thanks to the design of the base and the attachment of the storage container, you can decide the position in an angle of 60°, depending on your preference or of the fact you are left or right handed.
SMILE LITE MDP
MOBILE DENTAL PHOTOGRAPHY BY PROF. LOUIS HARDAN
Nowadays, each new smartphone arriving on the market is equipped with a more performing and amazing camera ! It is for taking advantage of this revolution in progress that Smile Line proposes you the very first device specially studied for allowing the most beautiful dental photos with your smartphone : Smile Lite MDP – professional dental photography accessible for all !
Smile Lite MDP, that can be considered as a “ mini photo studio ”, took 3 years of development and tests. The device is equipped with three groups of LEDs (light emitting diodes). Each group can be lit up individually, while you also have the possibility to set the power of illumination thanks to a dimmer (four different steps of power).
The back of Smile Lite MDP is equipped with a universal adaptor that is adjustable for any model of smartphone having a width between 55-85mm.
Smile Lite MDP is a plug and play device that is very easy to use and that doesn’t need any special App, calibration process or specific education. It will allow you to drastically improve your results with the camera of your smartphone… very easily.
Soon it will become a mandatory tool for you :
- Photos for shade taking
- Every day communication with the lab
- Short video clips
- Patients’ documentation
- Artistic pictures
Passionate users will be happy to know that some accessories exist as an option. Thanks to them, you’ll have the possibility to take pictures with a polarising filter (item no. 6620) or with diffusors (item no. 6610) for even more professional results.
VENEER ME
MAXIMUM SECURITY FOR YOUR VENEERS
Thanks to veneerME, you’ll be able to carry and ship and also manipulate your hyper-delicate veneers in the highest conditions of security !
The sticky polyurethane gel-pad
The base of veneerME box is covered with a sticky pad out of polyurethane gel. Veneers are placed on this pad on their buccal surface, and adhere naturally. All the preparation process of the internal part of the veneer (acid etching, silanization) can be done in this position without any fear of a veneer escaping or falling on the floor. The pad’s material is super resistant and can be re-used several times (it is easily replaceable in case of deterioration).
The security membrane-frame
Once the veneers are secured on the pad, the membrane-frame is clipped on the base of veneerME box for extra fixation. The xx-thin membrane, made out of nylon, delicately adapts to the shape of the veneers. This done, you just need to close the lid and your master work is ready for delivery.
The membrane-frame can be replaced -if needed- after having been used several times.
Huge advantage : the membrane is permeable ! In other words the clinician can proceed with rinsing and drying after having replaced the membrane-frame on the base. This way the clinician can work in the best conditions and in total security.
SLIM PAD PRO STAINS & SLIM PAD PRO STAINS ARTIST
Be curious. Ask the question « why » or « why not ». All of this arises from an attitude, a philosophy and an intentionality. This is what allowed Smile Line to develop new trends. With passion and great enthusiasm.
SlimPad PRO is proof of it. It is with no doubt that the SlimPad PRO is the most exclusive in its’ category. Be the envy!
- Base and lid: high precision machining in solid aluminum
- Surfaces: delicate sandblasting and anodization for a very soft touch
- Ultra-thin: the base is only 5.6mm high ( ! )
- Ergonomic and very compact
- Dimensions adapted to the needs for new materials and technologies
- Available in three versions: B-build-up / S-stains / C-compo
S Stains
- Exclusive mixing slab out of aluminum oxide (Al2O3), white - opaque
- Soft surface
- 25 depressions
- Extended preservation time for stains consistency
- Large and comfortable mixing surface
S Stains "Artist"
With the consistency of today’s generation of stains, it is sometimes no more an advantage to store them in small depressions (more difficult remix, flow over…). On the contrary, the fact of having a wide and flat surface makes personal mixings more comfortable and much easier. SlimPad PRO-S "Artist" has only 2 depressions.
The material used for the mixing plate is still aluminium oxide (Al2O3) that remains «cold» for a longer creamy consistency of the stains.
SlimPad PRO – PET protection pouch
Made out of recycled PET (collected PET bottles in the sea and on the coast in South-Africa), this pouch is the ideal complement of the SlimPad PRO (protection – transport), much appreciated by KOLs who are travelling a lot and suitable for people who are taking part to a hands-on course outside the lab.
Contact us
Are you interested in our products or have questions about our products?
We are happy to help you. Feel free to contact us.